雄县地热田示踪试验的解释及分析     

庞菊梅  王树芳  孙彩霞  高小荣  刘久荣 《城市地质》2011,6(2):12-17

雄县地热田在2009--2010年地热回灌期间开展了示踪试验。示踪试验过程中没有从生产井和观测井群所取水样中检测到示踪剂,但是基于生产井和回灌井之间流动通道的若干假设,对示踪剂回收的浓度及峰值的出现时间进行了模拟预测,对通道的流体流速进行了估计。并且运用水平裂隙介质模型对由于长期地热采暖尾水回灌可能引起的热储冷却进行了预测,为回灌井和生产井的合理井间距的选择,提供一定的依据。  相似文献   

泰安市岱岳区土地信息监管系统建设     

郭立勤  于学军  朱华 《山东地质》2011,(5):54-57

泰安市国土资源局岱岳区分局为了提高监管力度,利用三维可视化、地理信息、遥感影像、场景合成等先进技术,结合大比例尺数字高程模型,合成真实的三维实景环境,与国土资源数据有机融合,实现国土信息的三维再现。构建信息系统监管平台,实现了建设用地审批、供地、利用、补充、检查全过程动态化、精细化管理。在土地行政审批管理中,提高了效率、规范了流程、落实了责任,实现了以图管地的目的。  相似文献   

Modeling of electromagnetic waves in axisymmetric geometry using a Laguerre spectral method     

A.F. Mastryukov 《Russian Geology and Geophysics》2011,52(9):1035-1042

A spectral method for modeling high-frequency electromagnetic waves in axisymmetric geometry is proposed.The method is based on the expansion of the solutions of Maxwell’s equations in Laguerre functions in the time region.The spectral method is used to solve Maxwell’s equations for both 2D media and stratified media. In the case of stratified media, a Fourier–Bessel expansion in the radial variable is used. The effectiveness of the spectral and finite-difference methods is compared. Harmonic solutions and solitary solutions by the Laguerre method are considered, and the dynamics of monochromatic and broadband electromagnetic pulses are examined.  相似文献   

考虑侧填荷载的分离式基础涵洞地基承载力新算法和试验   总被引：1，自引：0，他引：1  

王雯璐  赵大军  王磊 《吉林大学学报(地球科学版)》2011,41(3):771-776,783

为了研究涵侧填土对采用分离式基础涵洞地基承载力的提高效应,先结合基底土体的受力特点,进行受力分析,建立计算模型,构建求解分离式基础地基极限承载力的算法,给出承载力表达式。然后在相似理论的指导下,设计了5组模型,试验模拟粉质黏土地基受荷变形直到破坏的全过程,绘出荷载-沉降曲线,测得涵侧填土高度为0、4、8、12、16 m时的地基极限承载力。试验发现:随着侧填土高度的增加,承载力显著提高,当填土为12 m时已达到885 kPa;但提高幅度表现出非线性特性,先从18.42%增加到36.11%,然后减小到3.39%;当填土达到16 m时承载力达到915 kPa且不再增加;同时发现使用本文算法与试验实测值的误差小于10%,可以考虑用此算法计算分离式基础涵洞的地基极限承载力。继而得出结论:当涵洞地基沉降满足设计要求时,涵侧填土显著提高了地基承载力,节约工程造价,且提高的幅度先增加后减少,当达到16 m时地基承载力便逐渐趋于915 kPa。  相似文献   

盾构法隧道开挖卸荷回弹试验研究     

熊卫兵  石长礼  杨子良 《上海国土资源》2011,32(2):71-74

本文以上海某盾构法隧道开挖为例,根据原状土卸载应力路径下的回弹试验结果,探讨了土体在卸荷状态下的变形特性,并对盾构法隧道开挖卸荷影响深度进行了初步分析探讨。  相似文献   

A review of the equations used to predict the velocity distribution within a ship’s propeller jet     

W. Lam  G.A. Hamil  Y.C. Song  S. Raghunathan 《Ocean Engineering》2011,38(1):1-10

Predicting the velocity within the ship’s propeller jet is the initial step to investigate the scouring made by the propeller jet. Albertson et al. (1950) suggested the investigation of a submerged jet can be undertaken through observation of the plain water jet from an orifice. The plain water jet investigation of Albertson et al. (1950) was based on the axial momentum theory. This has been the basis of all subsequent work with propeller jets. In reality, the velocity characteristic of a ship’s propeller jet is more complicated than a plain water jet. Fuehrer and Römisch (1977), Blaauw and van de Kaa (1978), Berger et al. (1981), Verhey (1983) and Hamill (1987) have carried out investigations using physical model. Current paper reviews the state-of-art of the equations used to predict the time-averaged axial, tangential and radial components of velocity within the zone of flow establishment and the zone of established flow of a ship’s propeller jet.  相似文献   

Analysis of formation pressure test results in the Mount Elbert methane hydrate reservoir through numerical simulation     

Masanori Kurihara  Akihiko SatoKunihiro Funatsu  Hisanao OuchiYoshihiro Masuda  Hideo NaritaTimothy S. Collett 《Marine and Petroleum Geology》2011,28(2):502-516

Targeting the methane hydrate (MH) bearing units C and D at the Mount Elbert prospect on the Alaska North Slope, four MDT (Modular Dynamic Formation Tester) tests were conducted in February 2007. The C2 MDT test was selected for history matching simulation in the MH Simulator Code Comparison Study. Through history matching simulation, the physical and chemical properties of the unit C were adjusted, which suggested the most likely reservoir properties of this unit. Based on these properties thus tuned, the numerical models replicating “Mount Elbert C2 zone like reservoir”, “PBU L-Pad like reservoir” and “PBU L-Pad down dip like reservoir” were constructed. The long term production performances of wells in these reservoirs were then forecasted assuming the MH dissociation and production by the methods of depressurization, combination of depressurization and wellbore heating, and hot water huff and puff. The predicted cumulative gas production ranges from 2.16 × 10⁶ m³/well to 8.22 × 10⁸ m³/well depending mainly on the initial temperature of the reservoir and on the production method.This paper describes the details of modeling and history matching simulation. This paper also presents the results of the examinations on the effects of reservoir properties on MH dissociation and production performances under the application of the depressurization and thermal methods.  相似文献   

静力触探技术在东海陆架工程勘察中的应用研究     

陈培雄  刘奎  吕小飞  李冬  王振红 《海洋学研究》2011,29(4):71-76

通过对东海大陆架海底浅表层土样的静力触探参数进行统计分析,得到该区域细砂、粘土、淤泥质土和淤泥的静力触探统计值,建立了研究海区基于静力触探参数的土类判别图,可用于快速判定土的类别.根据静力触探参数,并应用经验公式估算了海底粘性土的抗剪强度和灵敏度,对估算公式经验系数选择进行了深入研究,提出在研究海区应用经验公式进行粘性...  相似文献   

TesTrack随钻测压工具在XX油田K14井的应用     

杨虎  罗鹏  王健  孔令强  李战奎 《海洋地质译丛》2011,(4):80-83

地层压力测试是测井作业非常重要的环节,在研究地层压力剖面、判断流体性质、划分气、油、水流体界面、估算地层渗透率、预测地层产能等方面发挥着举足轻重的作用。BakerHughes公司的TesTrack随钻测压工具在XX油田首次应用,分析了该工具的特点及其应用效果,对该工具的推广应用具有重要的参考和借鉴意义。  相似文献   

基于广义极值分布的设计波高推算   总被引：1，自引：0，他引：1  

陈子燊  刘曾美  路剑飞  于吉涛 《热带海洋学报》2011,(3)

简介了广义极值分布函数及其3种参数估计方法,包括极大似然(ML)、线性矩(LM)和间隔最大积(MPS)估计的计算方法。使用广义极值分布函数推算了北部湾涠洲岛海域3个波向的年波高极值序列设计波高,并与Weibull分布、Gumbel分布和皮尔逊Ⅲ型分布的推算结果加以对比。分析表明,涠洲岛海域极值波高服从于广义极值Ⅲ型分布,拟合优度检验结果表明广义极值分布能更好地拟合极值波高;MPS方法是一种优良的参数估计法,推算的设计波高可作为海岸环境工程设计的首要参考值。  相似文献